Your current position:HOME|Products|BUMP SERIES


Production Overview

Wafer-level packaging (WLP) is the technology of packaging an integrated circuit while still part of the wafer, in contrast to the more conventional method of wire bonding. WLP is essentially a true chip-scale package (CSP) technology, since the resulting package is practically of the same size as the die. 
TFME offers various leading edge wafer bumping processes. WLP is a wafer level packaging technology which uses cu pillar or solder bumps to form the interconnection between the integrated circuit (IC) and the motherboard (or Lead Frame). WLP includes wafer bumping with or without Redistribution Layer (RDL), wafer level final test, wafer singulation and device packing in tape & reel to support full turn?key solution. TFME’s Under Bump Metallurgy (UBM) over PBO or PI layers on the die active surface provides a reliable interconnect solution to meet the demands of the growing global consumer market place for portable electronics.
TFME offers customers with both 200mm and 300mm WLP Layout Design, Qualify and Mass Production services, including plated solder bump/Cu Pillar bump and ball placement technology with lead free materials.
The WLP package family is applicable for a wide range of semiconductor device types from high end AP/PA/BB/RFIC chips, to Wireless LAN, card, switch, power management, memory, and standard analog, etc.
Wafer Level Features
 * 4-256 ball count
* Small body 0.64 mm2 to large 57.0 mm2 body size
* PBO, Polyimide (PI) & LCP (low curing temperature polymer) Re-passivation and Re-distribution Layer (RDL) available
* Cu Pillar. Solder bump and SAC Alloy ball-loaded bumping options
* Reliable thick Cu RDL and Cu UBM with good electrical performance
* Compatible with conventional SMT assembly and test techniques
Die Level Features
 * Best in package level and board level reliability
* Back-side lamination available
* Cost effective T&R packaging solutions for small ICs
* Full turnkey WLP, including probing and DPS
* Wide selection of pocket tape carrier options

Reliability Test Standards
The test criterion is zero defect out of 77 sampling units.
JEDEC Precondition MSL-1:J-STD-20/JESD22-A113
Temp/Humidity Test 85°C/ 85% RH, 1000hrs, JEDEC 22- A101
Pressure Cooker Test 121°C/ 100% RH/ 15 PSIG, 96hrs, JEDEC 22- A102
Temp Cycle Test -65 ~ 150°C, 500cycles, JEDEC22-A104
High Temp Storage Test  150°C, 1000hrs, JEDEC 22- A103  



CopyRight 2015 All Right Reserved Tongfu Microelectronics Co., Ltd.
Address: Jiangsu province Nantong City Road, No. 288 Telephone:0513-85058888 Fax:0513-85058868

福利彩票双色球坐标走势图 北京pk10赛车走势分析 单机麻将免费 赛车pk10一天开奖图 17年重庆时时彩骗局 腾讯出的游戏 重庆时时和龙虎走势图 北京pk10六码怎么翻倍 大赢家篮球比分 什么项目发小视频能赚钱 北京pk10历史开奖直播 讯赢网球比分 重庆时时开奖助手 pk10视频开奖直播 qq分分彩 福彩3d走势图带连线 体育彩票泳坛夺金